本文共 3897 字,大约阅读时间需要 12 分钟。
12.0 第一个:namespace prefix = o ns = "urn:schemas--com::office" />
是创建你的第一个程序的时候了。本章中的指导将这样组织:
12.1第一步
如果万事具备,你应该在你的masm同一个区上有一个(或win32asm)目录。为每个工程,你应该创建一个子目录。
在win32目录中创建一个名为“Firstprogram“的子目录。创建一个新的文本并重命名为“first.asm”。
12.2第二步
在first.asm中输入一下代码:
.486
.model flat, stdcalloption casemap:none
includelib masm32libkernel32.lib
includelib masm32libuser32.libinclude masm32includekernel32.inc
include masm32includeuser32.incinclude masm32include.inc因为现在,我们仅需要kernel32和user32两个dll。
12.3第三步
我们将要创建著名的“Hello World”程序。要显示“hello World”字符串,我们要用消息对话框。消息对话框由MessageBox创建。你可以在《win32 程序员参考》(看第二章)中查找这个函数。这是书上说的:
MessageBox函数创建,显示并操作消息对话框。消息对话框包含应用程序定义的消息和标题,加上任何预定义的图标与按钮的组合。
int MessageBox(
HWND hWnd, // handle of owner windowLPCTSTR lpText, // address of text in message boxLPCTSTR lpCaption, // address of title of message box UINT uType // style of message box);Parameters
hWnd
ntifies the owner window of the message box to be created. If this parameter is NULL, the message box has no owner window.
lpText
Points to a null-tenated string containing the message to be displayed.
lpCaption
Points to a null-terminated string used for the dialog box title. If this parameter is NULL, the default title Error is used.
uType
Specifies a set of bit flags that determine the contents and behavior of the dialog box. This parameter can be a combination of flags from the following groups of flags.
[--SNIP--]
在这段文字后有所有常数和标志的列表(他们定义在windows.inc中)。因为它太长了,我没有在这里列出来。通过查看参考,你就知道MessageBox函数要4个参数:父窗口(owner),指向消息串的指针,指向标题串的指针和消息框的类型。
HWnd可以是Null。因为我们的程序没有窗口。
LpText必须是指向我们文本的指针。这仅仅意为参数是文本所在地址的offset。
LpCaption 是标题串的offset。
UType 是参考中解释的像MB_OK,MB_OKCANCEL,MB_ICONERROR等值的组合。
让我们先定义两个用于MessageBox的字符串:
在first.asm中加入:
.data
MsgText "Hello world!",0
MsgTitle db "This is a messagebox",0.data 指示data部分的开始。用db,字节直接被插入,而且字符串又只是字节的集合,data部分会在包含上面的字符串,附加上结尾的0。MsgText装有第一个字符串的offset。MsgTitle有第二个字符串的offset。现在我们可以使用函数:
invoke MessageBox, NULL, offset MsgText, offset MsgTitle, Null
但因为用的是invoke,你可以使用(更)ADDR代替offset:
invoke MessageBox, Null, ADDR MsgText, ADDR MsgTitle, Null
我们还没有看最后一个参数,但这不会有什么问题。因为MB_OK(有一个ok按钮的消息对话框的样式)等于0(NULL)。但你也可以使用其他的任何样式。Utype(第4个参数)的定义是:
指定一系列决定对话框内容与行为的位标志。这个参数可以是下面标志组中标志的组合。
现在以我们要一个有OK按钮与“information”图标的简单消息对话框为例。MB_OK是OK按钮的样式,MB_ICONINFORMATION是information图标的样式。样式是用“or”操作符联合的。这不是or伪代码。Masm会在前处理or操作。不用or,你可以用+号(加号)代替,但有时对层叠样式有问题(一个样式包含其他一些样式)。但在本例中你也可以用+号。
.code
start:
invoke MessageBox, NULL, ADDR MsgText, ADDR MsgTitle, MB_OK + MB_ICONINFORMATION
end start
把以上的代码加入到你的first.asm文件中。
我们还加入了一个start标签。如果你现在汇编你的程序并运行它,它将显示一个消息对话框但很有可能在你点OK之后就崩溃了。这是因为程序没有结束,而开始MessageBox代码后的任何东西。Windows中程序是用ExitProcess函数结束的:
VOID ExitProcess(
UINT uExitCode //对于所有线程的退出代码
);我们可以把0用作退出码。
把你的代码改成这样:
.code
start:
invoke MessageBox, NULL, ADDR MsgText, ADDR MsgTitle, MB_OK + MB_ICONINFORMATION
invoke ExitProcess, NULLend start
12.4第4步
因此我们最终的程序是:
.486
.model flat, stdcalloption casemap:none
includelib masm32libkernel32.lib
includelib masm32libuser32.libinclude masm32includekernel32.inc
include masm32includeuser32.incinclude masm32includewindows.inc.data
MsgText db "Hello world!",0MsgTitle db "This is a messagebox",0.code
start:
invoke MessageBox, NULL, ADDR MsgText, ADDR MsgTitle, MB_OK or MB_ICONINFORMATIONinvoke ExitProcess, NULLend start
12.5第5步
现在我们将从产生可执行文件。
用一下内容新建一个文本文件并命名为make.bat:
@echo off
ml /c /coff first.asmlink /subsystem:windows first.objpause>nul解释:
ml /c /coff first.asm
Ml是宏汇编器(masm)。Masm将从程序创建原始代码。参数的意思是:
/c =汇编不链接(因为我们用link.exe来做这项工作)/coff = 产生COFF格式的()文件,这是Windows可执行文件的标准格式。first.asm = a汇编first.asm文件link /subsystem:windows first.obj
链接器把object文件和所有导入的dll与库链接起来:
/subsystem:windows = 创建Windows的可执行文件。first.obj = 链接 first.obj如果你把所有的事情都正确的完成了,并运行批处理文件。将产生first.exe。运行它,看看有什么结果。
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/10748419/viewspace-1004760/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/10748419/viewspace-1004760/